- Engineering. Made in Germany.
- SPAX - we care.
- Description
- Detailed Description
- Technical Details
- Downloads
- Certificates
Basically, the special drill SPAX drill 5.2 is the big brother of the SPAX step drill 4. However, this has been developed exclusively for pre-drilling the wooden deck boards on aluminum substructures. Suitable for the SPAX Alu. In addition to the larger thread diameter of 5.2 mm, it is primarily the thread length that is considerably shorter in the SPAX drill 5.2 at only 19 mm. The 4 mm thick shank is suitable for inserting the countersink into the step drill 4 from the front and turning the whole thing into a real drill countersink. For you, this means: No annoying change between drill and countersink, enormously time-saving installation of wooden planks on aluminum substructures.
Compared to the SPAX step drill 4, the special drill SPAX drill 5.2 has a larger thread diameter of 5.2 mm and a shorter thread length of only 19 mm. On the 4 mm thick shank, you can insert the countersink of the SPAX step drill 4 and turn the whole into a drill countersink for the application wood deck board on aluminum.
Document Type | Format | |
---|---|---|
Outdoor brochure |
|
|
SPAX Outdoor Decking Flyer |
|
Basically, the special drill SPAX drill 5.2 is the big brother of the SPAX step drill 4. However, this has been developed exclusively for pre-drilling the wooden deck boards on aluminum substructures. Suitable for the SPAX Alu. In addition to the larger thread diameter of 5.2 mm, it is primarily the thread length that is considerably shorter in the SPAX drill 5.2 at only 19 mm. The 4 mm thick shank is suitable for inserting the countersink into the step drill 4 from the front and turning the whole thing into a real drill countersink. For you, this means: No annoying change between drill and countersink, enormously time-saving installation of wooden planks on aluminum substructures.
Compared to the SPAX step drill 4, the special drill SPAX drill 5.2 has a larger thread diameter of 5.2 mm and a shorter thread length of only 19 mm. On the 4 mm thick shank, you can insert the countersink of the SPAX step drill 4 and turn the whole into a drill countersink for the application wood deck board on aluminum.
Document Type | Format | |
---|---|---|
Outdoor brochure |
|
|
SPAX Outdoor Decking Flyer |
|
We help with the choice of screws
Discover the world of SPAX
- SPAX in der Praxis
- Services für Profis
- SPAX - WE CARE
- Downloads