Decking Fastener Stick PRO

Quantity
  • Board width for tropic woods
  • Concealed fastening of decking boards on wood and aluminium
  • Dimension: L x W x H = 60 x 20 x 8 mm
  • For aluminum substructure: 3 mm wall thickness for softwood planks, 4 mm wall thickness for hardwood planks
  • Not suitable for: Siberian larch, Brazilian teak, ekki, massaranduba, wood plastic composite (WPC) lumber. Follow the instructions enclosed!
  • Prevention of waterlogging thanks to ventilation web effect
  • Suitable for: Timber boards with max. thickness 25 mm, Douglas fir, pine, European larch, oak, Garapa, yellow balau, IPE (max. 21 x 130 mm), Thermowood (observe manufacturer specifications if necessary). For very hard imported timbers, we recommend pre-dr
  • The fastening screw in the substructure can be removed even after installation
  • The freely projecting board end may protrude max. 40 mm over the last substructure
  • Quick and easy
Table
Document Type Format
SPAX Outdoor Decking Flyer PDF
Outdoor brochure PDF

Table

Document Type Format
SPAX Outdoor Decking Flyer PDF
Outdoor brochure PDF




We help with the choice of screws

Find the right screw for your project – with our screw consultant

For every challenge, SPAX has a screw that is up to it:
Find exactly the fastener your project needs with our screw consultant. With a few clicks you can find the right screw for your application.


Discover the world of SPAX


SPAX connects - our assortment at a glance



We are here for you!

Do you have questions that can only be answered personally?
 

+49 2333 799-0
 

Or use our contact page