Our SPAX tension anchor SXHD including pressure plate is reminiscent of a large "L", as its base plate has a length of up to 182 mm. This allows loads to be transferred into the concrete substrate in a statically verifiable manner. Two plate thicknesses are available: 2.0 mm for the 142, 280 and 340 mm high variants, and 3.0 mm for the largest model with a height of 400 mm, so that higher loads can be transferred. The dowel holes are also selected in accordance with the size- a 12 mm dowel is sufficient for the smaller ones, while a 16 mm dowel can be used for the largest tie rod. All SXHD variants can be fastened to the wood with SPAX grooved nails or SPAX wood screws. This means for you: Quick and easy assembly, highest tensile load capacity.